Epoxy Coating
AR 100
AR-100 is an exceptionally high gloss, self-leveling epoxy coating, that is supplied as a 2 Parts A and 1 Part B by volume system. AR-100 has a long work time of 65 minutes which allows for extended work time to apply product. AR -100 is 100% solids (zero VOC) without the use of extenders or plasticizers enhancing durability and chemical resistance. Can be used on concrete floors, countertops and other decorative surfaces. When used on concrete floors it is recommended to be applied over either a MVB or VRM primer. May be used as a pigmented topcoat with American Resins pigment packs or as a clear resulting in high gloss pigmented coatings or water white clear coats.
AR 100 High Flow
Low viscosity epoxy primer coating system allowing for superior penetration in concrete substrates. Can also be used as a finish coat under circumstances where a longer pot life is required.
AR 100 Fast Cure
Epoxy coating designed for fast cure priming applications with a recoat time ranging between 3-4 hours. It yields a seamless glossy finish, and a high covering power.
AR MVB Slow
100% solid moisture vapor barrier epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors.
AR MVB Fast
Fast Cure 100% solid moisture vapor barrier epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors.
Epoxy Membrane
Epoxy membrane designed to protect substrates against water infiltration which exhibits high elongation and a high resistance to tearing.
Casting Epoxy
Epoxy casting system used for mass castings with thicknesses greater than 1 inch. Designed for casting, potting and embedding applications.
Crack Filler
Epoxy crack filler, system designed to repair and fill vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics.